Figure 13. Inside the C6420 sled
1
sled pull handle
3
SATA connector
5
CPU1 processor heat sink module
7
supporting bracket
9
memory slot (4)
PowerEdge C6420 sled
The PowerEdge C6420 sled is a server unit that is installed into the PowerEdge C6400 enclosure. The sled features dual processors,
memory, a PCIe expansion slot, mezzanine cards, and onboard storage (SD card and M.2 SATA).
Removing a sled
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
NOTE:
The process of removing a sled blank is similar to removing a sled.
Step
Press the retaining latch and using the handle slide the sled out of the enclosure horizontally, ensuring that the sled is supported from
beneath.
36
Installing and removing enclosure components
Safety
instructions.
Before working inside your
2
mezzanine card
4
memory slot (4)
6
CPU2 processor heat sink module socket
8
M.2 SATA riser
10
PCIe expansion card riser assembly
system.