Monitoring Protected Ports; Where To Go Next; Additional References - Cisco Catalyst 2960-X Security Configuration Manual

Configuring Port-Based Traffic Control
Command or Action
Step 8
copy running-config startup-config
Example:
Switch# copy running-config startup-config

Monitoring Protected Ports

Table 37: Commands for Displaying Protected Port Settings
Command
show interfaces [interface-id] switchport

Where to Go Next

•

Additional References

Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
OL-29048-01
Purpose
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Monitoring Protected Ports
Purpose
(Optional) Saves your entries in the configuration
file.
427