Configuring The Dhcp Relay Agent - Cisco Catalyst 2960-X Security Configuration Manual

Configuring the DHCP Relay Agent

Configuring the DHCP Relay Agent
Follow these steps to enable the DHCP relay agent on the switch:
SUMMARY STEPS
1. enable
2. configure terminal
3. service dhcp
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
service dhcp
Example:
Switch(config)# service dhcp
Step 4
end
Example:
Switch(config)# end
Step 5 show running-config
Example:
Switch# show running-config
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
218
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Enables the DHCP server and relay agent on your switch.
By default, this feature is enabled.
Returns to privileged EXEC mode.
Verifies your entries.
Configuring DHCP
OL-29048-01