Configuring A Supplicant Switch With Neat - Cisco Catalyst 2960-X Security Configuration Manual

Configuring a Supplicant Switch with NEAT

Command or Action
Step 6
dot1x pae authenticator
Example:
Switch(config-if)# dot1x pae authenticator
Step 7 spanning-tree portfast
Example:
Switch(config-if)# spanning-tree portfast trunk
Step 8 end
Example:
Switch(config-if)# end
Step 9 show running-config interface interface-id
Example:
Switch# show running-config interface
gigabitethernet2/0/1
Step 10
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring a Supplicant Switch with NEAT
Beginning in privileged EXEC mode, follow these steps to configure a switch as a supplicant:
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
342
Configuring IEEE 802.1x Port-Based Authentication
Purpose
Configures the interface as a port access entity
(PAE) authenticator.
Enables Port Fast on an access port connected to
a single workstation or server..
Returns to privileged EXEC mode.
Verifies your configuration.
(Optional) Saves your entries in the configuration
file.
OL-29048-01