Monitoring Protected Ports
Command or Action
Step 8
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Monitoring Protected Ports
Table 32: Commands for Displaying Protected Port Settings
Command
show interfaces [interface-id] switchport
Where to Go Next
•
Additional References
Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
400
Configuring Port-Based Traffic Control
Purpose
(Optional) Saves your entries in the configuration
file.
Purpose
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
OL-29048-01