Configuring IEEE 802.1x Port-Based Authentication
Command or Action
Step 9
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring Limiting Login for Users
SUMMARY STEPS
1. enable
2. configure terminal
3. aaa new-model
4. aaa authentication login default local
5. aaa authentication rejected n in m ban x
6. end
7. show aaa local user blocked
8. clear aaa local user blocked username username
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
aaa new-model
Example:
Device(config)# aaa new-model
Step 4
aaa authentication login default local
Example:
Device(config)# aaa authentication login
default local
OL-29048-01
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enables the authentication, authorization, and accounting (AAA)
access control model.
Sets the authentication, authorization, and accounting (AAA)
authentication by using the default authentication methods.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Configuring Limiting Login for Users
339