Configuring RADIUS
Command or Action
Step 6
end
Example:
Switch(config)# end
Step 7
show running-config
Example:
Switch# show running-config
Step 8
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Identifying the RADIUS Server Host, on page 83
RADIUS Server Host, on page 69
Configuring the Switch to Use Vendor-Specific RADIUS Attributes
Follow these steps to configure the switch to use vendor-specific RADIUS attributes:
SUMMARY STEPS
1. enable
2. configure terminal
3. radius-server vsa send [accounting | authentication]
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
OL-29048-01
Configuring the Switch to Use Vendor-Specific RADIUS Attributes
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
95