Cisco Catalyst 2960-X Security Configuration Manual page 188

Configuring Time Ranges for ACLs
SUMMARY STEPS
1. enable
2. configure terminal
3. time-range time-range-name
4. Use one of the following:
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch(config)# enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
time-range time-range-name
Example:
Switch(config)# time-range workhours
Step 4 Use one of the following:
• absolute [start time date] [end time date]
• periodic day-of-the-week hh:mm to
[day-of-the-week] hh:mm
• periodic {weekdays | weekend | daily} hh:mm
to hh:mm
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
164
• absolute [start time date] [end time date]
• periodic day-of-the-week hh:mm to [day-of-the-week] hh:mm
• periodic {weekdays | weekend | daily} hh:mm to hh:mm
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Assigns a meaningful name (for example, workhours) to the
time range to be created, and enter time-range configuration
mode. The name cannot contain a space or quotation mark
and must begin with a letter.
Specifies when the function it will be applied to is operational.
• You can use only one absolute statement in the time
range. If you configure more than one absolute
statement, only the one configured last is executed.
• You can enter multiple periodic statements. For
example, you could configure different hours for
weekdays and weekends.
Configuring IPv4 ACLs
OL-29048-01