Example: Setting A Telnet Password For A Terminal Line; Example: Setting The Privilege Level For A Command; Additional References - Cisco Catalyst 2960-X Security Configuration Manual

Example: Setting a Telnet Password for a Terminal Line

Related Topics
Protecting Enable and Enable Secret Passwords with Encryption, on page 24
Additional Password Security, on page 20
Example: Setting a Telnet Password for a Terminal Line
This example shows how to set the Telnet password to let45me67in89:
Switch(config)# line vty 10
Switch(config-line)# password let45me67in89
Related Topics
Setting a Telnet Password for a Terminal Line, on page 27
Terminal Line Telnet Configuration, on page 21

Example: Setting the Privilege Level for a Command

This example shows how to set the configure command to privilege level 14 and define SecretPswd14 as the
password users must enter to use level 14 commands:
Switch(config)# privilege exec level 14 configure
Switch(config)# enable password level 14 SecretPswd14
Related Topics
Setting the Privilege Level for a Command, on page 31
Privilege Levels, on page 22

Additional References

Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
36
Controlling Switch Access with Passwords and Privilege Levels
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
OL-29048-01