Monitoring 802.1X Statistics And Status - Cisco Catalyst 2960-X Security Configuration Manual

Monitoring 802.1x Statistics and Status

Command or Action
Step 2
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 3 dot1x default
Example:
Switch(config-if)# dot1x default
Step 4 end
Example:
Switch(config-if)# end
Monitoring 802.1x Statistics and Status
Table 28: Privileged EXEC show Commands
Command
show dot1x all statistics
show dot1x interface interface-id statistics
show dot1x all [count | details | statistics |
summary]
show dot1x interface interface-id
Table 29: Global Configuration Commands
Command
no dot1x logging verbose
For detailed information about the fields in these displays, see the command reference for this release.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
356
Configuring IEEE 802.1x Port-Based Authentication
Purpose
Enters interface configuration mode, and specify the
port to be configured.
Resets the 802.1x parameters to the default values.
Returns to privileged EXEC mode.
Purpose
Displays 802.1x statistics for all ports
Displays 802.1x statistics for a specific port
Displays the 802.1x administrative and operational
status for a switch
Displays the 802.1x administrative and operational
status for a specific port
Purpose
Filters verbose 802.1x authentication messages
(beginning with Cisco IOS Release 12.2(55)SE)
OL-29048-01