Creating Extended Named Acls - Cisco Catalyst 2960-X Security Configuration Manual

Configuring IPv4 ACLs
Command or Action
• permit {source [source-wildcard] | host source |
any} [log]
Example:
Switch(config-std-nacl)# deny 192.168.0.0
0.0.255.255 255.255.0.0 0.0.255.255
or
Switch(config-std-nacl)# permit 10.108.0.0
0.0.0.0 255.255.255.0 0.0.0.0
Step 5 end
Example:
Switch(config-std-nacl)# end
Step 6
show running-config
Example:
Switch# show running-config
Step 7 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Creating Extended Named ACLs

Follow these steps to create an extended ACL using names:
OL-29048-01
Purpose
• host source—A source and source wildcard of
• any—A source and source wildcard of 0.0.0.0
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Creating Extended Named ACLs
source 0.0.0.0.
255.255.255.255.
161