Configuring Port-Based Traffic Control
Monitoring Port Blocking
Table 38: Commands for Displaying Port Blocking Settings
Command
show interfaces [interface-id] switchport
Where to Go Next
•
Additional References
Related Documents
Related Topic
Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
Standard/RFC
OL-29048-01
Purpose
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
Document Title
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
Title
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Monitoring Port Blocking
431