11: W
S
EB
ERVER
Click the device address to set to Switch 1 and click OK.
6.
Notes:
The devices that are used in WindLDR are displayed in the Device Tree dialog box.
•
If the device address to set is not in the Device Tree, click Cancel, and then directly enter the device address in the text box for Link Box on
•
the Property tab.
This sets Switch 1 to a normally open contact (M0000).
Repeat steps 4 through 6 and set Switch 2 and the lamp.
7.
On the menu bar, click File > Save page as.
8.
The Save Page dialog box is displayed.
Enter the file name in Save Name, specify the folder to save to, and click OK.
9.
A confirmation message is displayed.
11-28
FC6A S
M
S
A
ERIES
ICRO
MART
LL
-
-O
T
C
IN
NE
YPE
OMMUNICATION
M
FC9Y-B1730
ANUAL