IDEC FC6A-C16K1CE Communications Manual page 190

Fc6a series microsmart all-in-one type
Hide thumbs Also See for FC6A-C16K1CE:
Table of Contents

Advertisement

8: J1939 C
OMMUNICATION
Undesignated CA
These settings configure messages that are exchanged as broadcasts without specifying specific CAs.
■ Receive Message tab
This tab configures messages that are transmitted from other CAs to the J1939 communication network as broadcasts.
(1)
(2)
(3)
(1) Device Settings
Sets the data registers that will be used by the received messages.
Settings
Tag name
Device address
Comment
S1 (Control Register)
Sets the starting address of the data registers that will store the receive results.
Storage
Destination
Starting number+0
Starting number+1
Starting number+2
Starting number+3
Starting number+4
8-22
Specifies the tag name of the device or the device address.
Shows the device address that corresponds to the tag name.
Shows the comment for the device address. This item can be edited.
Item
Received data length
Source address
Receive results status
Receive action flag
Bit 0
Receive buffer overwrite flag
Bits 1 to 15
Reserved
Reserved
FC6A S
M
S
A
ERIES
ICRO
MART
Description
This register stores the length of the received message data.
If the message that will be received exceeds 8 bytes, a multi-
packet message split into 8-byte packets will be received. After
the multi-packet message has finished being received, the split
data is combined and stored in the data storage destination.
If the length of the received message data is longer than the
maximum data length, the maximum data length is stored and
100 is stored in the receive results status.
This register stores the source address of the received message.
This register stores the receive results. To initialize this register,
write "0".
For details on the receive results status, see "Receive results
status" on page 8-16.
Stores the action flag for receiving.
When the internal receive buffer was overwritten by the next
message before the message data stored in the receive buffer
could be written to the data storage destination, this register
turns on for one scan.
-
-O
T
C
LL
IN
NE
YPE
OMMUNICATION
(4)
Description
M
FC9Y-B1730
ANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents