IDEC FC6A-C16K1CE Communications Manual page 217

Configure the settings.
7.
The value of the data register when the e-mail is sent can be included in the selected cell.
Item
DR Number
Word (W)
Integer (I)
Double (D)
Data Type
Long (L)
Float (F)
When word (W) or double (D) is selected, the conversion type can be specified. For example, when a data register value is
4660 (1234h), the data register value is converted and embedded in the e-mail body as follows:
Decimal: 4660
Hexadecimal: 1234
8. Click OK.
You are returned to the Attached File dialog box.
Click OK.
9.
FC6A S
Specify the data register number.
The 1-word value stored in the specified data register is converted to an unsigned 16 bits
value.
The 1-word value stored in the specified data register is converted to an unsigned 16 bits
value.
The 2-word value stored in the two consecutive data registers starting with the specified
data register is converted to an unsigned 32 bits value.
The 2-word value stored in the two consecutive data registers starting with the specified
data register is converted to a signed 31 bits value.
The 2-word value stored in the two consecutive data registers starting with the specified
data register is converted to a floating-point value according to IEEE754 format. Digits can
be specified between 1 and 7.
M S A - -O
ERIES ICRO MART LL IN
Description
T C M
NE YPE OMMUNICATION ANUAL
10: S E-
END MAIL
FC9Y-B1730
F
UNCTION
10-15