IDEC FC6A-C16K1CE Communications Manual page 187

Transmit results status
Status Code
0 Normal
Multi-packet message
1
transmitted
10 Transmit data length error
Internal transmit queue
20
overflow
Multi-packet transmit
100
error
Local address
200
unconfirmed
Destination address
201
unconfirmed
S2 (Transmit Trigger)
Sets the transmit trigger when "Event transmission" is selected for Type. When the transmit trigger is turned on, the message
is transmitted in ladder program END processing. After the message is transmitted, the transmit trigger is turned off.
D1 (REQ Response Permitted Flag)
This function transmits a PGN in response to a transmit request PGN received from the corresponding CA while the REQ
response permitted flag is on. When PGN 59904 (Request) is received from a CA, the transmit action flag's REQ received flag is
turned on, and in the next END processing a message for the corresponding PGN will be transmitted.
Request response example
J1939 online status
REQ response permitted flag
REQ received flag
Ladder program
END processing
Data storage destination DR
Transmit buffer
Receive buffer
(2) Append button/Delete button
Click Append to add a transmitted message to the message list (3).
To delete a message, select the message to delete in the message list, and then click Delete.
(3) Message list
Displays the content configured by the message parameter settings (4). The send message can also be enabled or disabled.
The message is enabled when the check box is selected and disabled when the check box is cleared.
Note:
Click the check box column header to perform the following operations.
If all transmitted message check boxes are on, all of the check boxes are cleared.
•
If any transmitted message check boxes are off, all of the check boxes are selected.
•
FC6A S
Description
A message with a data length of 9 bytes or longer has finished being transmitted.
The length of the transmitted message data was longer than the maximum data
length.
The limit on the number of messages that can be queued for transmission has been
reached.
A message with a data length of 9 bytes or longer could not be transmitted.
The message could not be transmitted because the local address is unconfirmed.
The message could not be transmitted because the destination CA address is
unconfirmed.
ON
M8301
OFF
ON
OFF
ON
OFF
ON
OFF
CAN
M S A
ERIES ICRO MART LL
REQ
REQ
- -O T C
IN NE YPE OMMUNICATION
8: J1939 C
Details
Message A
Message A
Message A REQ
M FC9Y-B1730
ANUAL
OMMUNICATION
8-19