Terminal Connection - IDEC FC5A-F2M2 User Manual

Terminal Connection

Caution
• Make sure that the operating conditions and environments are within the specified
• Be sure to connect the grounding wire to a proper ground, otherwise electrical
• Do not touch live terminals, otherwise electrical shocks may be caused.
• Do not touch terminals immediately after power is turned off, otherwise electrical
• When using ferrules, insert a wire to the bottom of the ferrule and crimp the ferrule.
• When connecting a stranded wire or two solid wires to single-pole terminal block, be
Ferrule for
Terminal block
To cramp the following ferrules, use the specified crimping tool (CRIMPFOX ZA 3).
For 1-cable connection
For 1-cable connection
Phoenix Type
AI 1-8 RD
AI 0.5-8 WH
For 2-cable connection
Phoenix Type
AI-TWIN2x0.75-8 GY
AI-TWIN2x0.5-8 WH
Note: The above ferrules, crimping tool, and screwdriver are made by Phoenix Contact and are available from Phoenix
Contact.
FC5A MicroSmart PID Module User's Manual FC9Y-B1283
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
values.
shocks may be caused.
shocks may be caused.
sure to use a ferrule. Otherwise the wire may slip off the terminal block.
For 2-cable connection
UL1007AWG18
UL1015AWG22
UL1007AWG18
UL1015AWG22
I
NSTALLATION AND
Cable Size
Cable Size
W
IRING
3-3