Pid Module Configuration - Program Parameters List (Ch0 And Ch1) - IDEC FC5A-F2M2 User Manual

PID Module Configuration - Program Parameters List (CH0 and CH1)

Program parameters for CH0 and CH1 are described here.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
Control Registers
Offset from
the control
register
CH0 CH1
(1) +180 +390 Set Point (SP)
(2) +181 +391 Step Time
(3) +182 +392 Wait Value
Proportional Band/
(4) +183 +393
Proportional Gain
(5) +184 +394 Integral Time
(6) +185 +395 Derivative Time
FC5A MicroSmart PID Module User's Manual FC9Y-B1283
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
C
Parameter
When input is thermocouple/resistance thermometer:
Set point (SP) lower limit to set point (SP) upper limit
When input is voltage or current:
Linear conversion min. to linear con- version max.
When step time unit is Minute:
0 to 6000 minutes
When step time unit is Second:
0 to 6000 seconds
When input range unit is Celsius:
0 to 100°C
(Range with a decimal point: 0.0 to 100.0°C)
When input range unit is Fahrenheit:
0 to 100°F
(Range with a decimal point: 0.0 to 100.0°F)
When input is voltage or current:
0 to 1000
Proportional band:
When input range unit is Celsius:
0 to 10000°C
(Range with a decimal point: 0.0 to 1000.0°C )
When input range unit is Fahrenheit:
0 to 10000°F
(Range with a decimal point: 0.0 to 1000.0°F)
When input is voltage or current:
0.0 to 1000.0%
Proportional gain:
0.00 to 100.00%
0 to 10000 sec
0 to 10000 sec
PID M
ONFIGURING ODULE USING
Description
W LDR
IND
R/W
R/W
R/W
R/W
R/W
R/W
R/W
6-19