IDEC FC5A-F2M2 User Manual page 3

• If relays or transistors in the MicroSmart output modules should fail, outputs may remain on or off. For output signals
which may cause serious accidents, provide a monitor circuit outside the MicroSmart .
• Do not connect the ground wire directly to the MicroSmart . Connect a protective ground to the cabinet containing
the MicroSmart using an M4 or larger screw. This is required when equipment containing the MicroSmart is
destined for Europe.
• Do not disassemble, repair, or modify the MicroSmart module s.
• When disposing of the MicroSmart , do so as an industrial waste.
ii
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
FC5A MicroSmart PID Module User's Manual FC9Y-B1283