IDEC FC5A-F2M2 User Manual page 68

Writing and Reading Parameters
When Write All Parameters or Read All Parameters is executed in the PID Module Configuration dialog
box, all parameters will be written to/read from the PID module as follows.
WindLDR
CPU Module
ROM
Downloading and Uploading User Program
When the user program download
from the CPU module as follows.
WindLDR
CPU Module
ROM
*1: When Write PID Module parameters after download is checked in the Download dialog, writing the PID module
parameters will be executed after the user program is downloaded to the CPU module. The PID module parameters
are written to the data registers in the CPU module and all PID modules configured in the Expansion Modules
Configuration dialog box. For details, see the following page.
FC5A MicroSmart PID Module User's Manual FC9Y-B1283
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
C
ONFIGURING
Flow of the parameters when executing
Write All Parameters.
Flow of the parameter when executing
Read All Parameters.
RAM
(Data Register)
*1
or upload is executed, the user program is downloaded to/uploaded
Flow of the user program when executing
the user program download.
Flow of the user program when executing
the user program upload.
RAM
(Data Register)
PID M W
ODULE USING IND
PID Module
PID Module
LDR
6-3