Table of Contents
Advertisement
A
E
PPLICATION
XAMPLES
5. Program CH0 Parameters
Configure the Program CH0 parameters in the PID Module Configuration dialog box. To open Input
CH1 Parameters in the PID Module Configuration dialog box, click on Program (CH0) tab.
PID Module Configuration Dialog Box (Program CH0 Parameters)
(1)
(2)
(3)
(4)
(1)
Set Point (SP)
(2)
Step Time
(3)
Wait Value
(4)
Alarm 1 Value
Notes:
• When the wait value is 0°C, the wait function is disabled.
• When the alarm value is 0°C, the alarm function is disabled.
• When a parameter for the program control except step time is changed in WindLDR, the parameter is
automatically copied to the following steps.
6. CH1 Parameters Setting
Configure CH1 Parameters in the same way as CH0.
7. Saving Parameters
Click OK button to save the configured parameters.
7-12
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Item
Step 0
100°C
60 minutes
10°C
0°C
FC5A MicroSmart PID Module User's Manual FC9Y-B1283
Setting
Step 1
Step 2
100°C
800°C
800°C
60 minutes
300 minutes
30 minutes
0°C
10°C
0°C
10°C
0°C
10°C
Step 3
Advertisement
Table of Contents
