Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
Click the
points.
Select a key point, then click
4.2.4 Calling Patrols
Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Calling patrol in the PTZ setting interface:
Steps:
1. In the PTZ setting interface.
2. Select the patrol number, and then click
3. Click
Calling patrol in live view mode:
Steps:
1. Press PTZ control on the front panel or on the remote, or click PTZ Control icon
2. Choose Patrol on the control bar.
3. Double click the patrol or select the patrol and click
icon to delete the corresponding key point, and click the trash icon
or
Figure 4. 8 Key Points Deletion
Menu> Camera> PTZ> More Settings
to stop it.
toolbar, to show the PTZ control toolbar.
button to adjust the order of the key points.
to call the patrol.
to call it.
49
to.delete all the key
on the quick setting
Advertisement
Table of Contents
