User Manual
User Manual of 87XX-P Series NVR
Create New Password: If the admin password is not used, you must create the new password for the
camera and confirm it.
4. Click OK to finish the acitavting of the IP camera. And the security status of camera will be changed to
Active.
2.5.2 Adding the Online IP Cameras
Purpose:
The main function of the NVR is to connect the network cameras and record the video got from it. So before you
can get a live view or record of the video, you should add the network cameras to the connection list of the
device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please
see Chapter Checking Network Traffic and Chapter Configuring Network Detection.
Option 1:
Steps:
1.
Right-click the mouse when you in the live view mode to show the right-click menu.
2.
Select
Steps:
1.
Figure 2. 18 Set New Password
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
on your demand.
To add the online cameras with same network segment:
1)
The detected online camera will be listed in the camera list, as shown in the figure below.
30