Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
12.1 Initializing HDDs
Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR.
Steps:
1. Enter the HDD Information interface.
2. Select HDD to be initialized.
3. Click the Init button.
4. Select the OK button to start initialization.
Menu > HDD> General
Figure 12. 9 HDD Information Interface
Figure 12. 10 Confirm Initialization
Figure 12. 11 Status changes to Formatting
164
Advertisement
Table of Contents
