Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
12.4 Configuring Quota Mode
Purpose:
Each camera can be configured with allocated quota for the storage of recorded files.
Steps:
1. Enter the Storage Mode interface.
2. Set the Mode to Quota, as shown in Figure 12. 22.
3. Select a camera for which you want to configure quota.
4. Enter the storage capacity in the text fields of Max. Record Capacity (GB), as shown in Figure 12. 23.
5. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button
Menu > HDD > Advanced
Note:
The NVR must be rebooted to enable the changes to take effect.
Figure 12. 22 Storage Mode Settings Interface
Figure 12. 23 Configure Record/Picture Quota
to enter the Copy Camera menu, as shown in Figure 12. 24.
171
Advertisement
Table of Contents
