Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
4.2.6 Calling Patterns
Purpose:
Follow the procedure to move the PTZ camera according to the predefined patterns.
Calling pattern in the PTZ setting interface
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select the pattern number.
3. Click
Call pattern in live view mode
Steps:
1. In the live view mode, press PTZ control on the front panel or on the remote control, or click PTZ Control
2. And then choose Pattern on the control bar.
3. Double click the pattern or select the pattern and click
, then the PTZ moves according to the pattern. Click
icon
on the quick setting toolbar.
Figure 4. 11 PTZ Toolbar- Pattern
to stop it.
to call it.
51
Advertisement
Table of Contents
