Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
5.8 Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W HDD but also in the
redundant HDD, will effectively enhance the data safety and reliability. .
Steps:
1. Enter HDD Information interface.
2. Select the HDD and click
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Redundant. For detailed information, please refer to Chapter 12.4 Managing HDD Group. There should be at least
another HDD which is in Read/Write status.
3. Enter the Record setting interface.
Menu> HDD
to enter the Local HDD Settings interface.
1)
Set the HDD property to Redundancy.
Figure 5. 34 HDD General-Editing
2)
Click Apply to save the settings.
3)
Click OK to back to the upper level menu.
Menu> Record> Parameters
1) Select Parameters tab.
Figure 5. 33 HDD General
71
Advertisement
Table of Contents
