Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
6.
Click the Apply button to save and exit the interface.
11.2.3 Configuring NTP Server
Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 11. 22.
3. Check the Enable NTP checkbox to enable this feature.
Example: http://www.hiddns.com/nvr
If you mapped the HTTP port on your router and changed it to port No. except 80, you have to
enter http://www.hiddns.com/alias:HTTP port in the address bar to access the device. You can
refer to Chapter 9.2.11 for the mapped HTTP port No.
OPTION 2: Access the devices via NVMS7000
For NVMS7000, in the Add Device window, select
information.
Nickname: Edit a name for the device as you want.
Server Address: www.hiddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name
on the HiDDNS server you created.
User Name: Enter the user name of the device. By default it is admin.
Password: Enter the password of the device. By default it is 12345.
Figure 11. 21 Access Device via NVMS7000
Figure 11. 22 NTP Settings Interface
and then edit the device
147
Advertisement
Table of Contents
