User Manual
User Manual of 87XX-P Series NVR
4. Click Export button to start exporting.
5. After the exporting is complete, click OK to finish the packet export, as shown in Figure 11. 47.
Up to 1M data can be exported each time.
11.4.3 Checking the Network Status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click the Status button on the lower- right corner of the page.
If the network is normal the following message box pops out.
Figure 11. 46 Export Network Packet
Figure 11. 47 Packet Export Attention
Figure 11. 48 Network Status Checking
161