Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
12.2 Managing Network HDD
Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD.
Steps:
1.
2.
3.
4.
5.
Enter the HDD Information interface.
Menu > HDD>General
Click the Add button to enter the Add NetHDD interface, as shown in Figure 12. 13.
Figure 12. 13 HDD Information Interface
Add the allocated NetHDD.
Select the type to NAS or IP SAN.
Configure the NAS or IP SAN settings.
•
Add NAS disk:
1) Enter the NetHDD IP address in the text field.
2) Enter the NetHDD Directory in the text field.
3) Click the OK button to add the configured NAS disk.
Note:
Up to 8 NAS disks can be added.
•
Add IP SAN:
Figure 12. 14 Add NAS Disk
166
Advertisement
Table of Contents
