Face Detection - OVS 4CH-P4 Quick Operation Manual

User Manual
User Manual of 87XX-P Series NVR

All VCA detection must be supported by the connected IP camera.

Face detection and vehicle detection are supported by DS-8600NI-E8 and DS-7700NI-E4 series.

9.1 Face Detection

Purpose:
Face detection function detects the face appears in the surveillance scene, and some certain actions can be taken
when the alarm is triggered.
Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA
2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.
3. Select the VCA detection type to Face Detection.
4. Click
linkage action for the face detection alarm. Please refer to step3~step5 of Chapter
错误！未找到引用源。
5. Click the Rule Settings button to set the face detection rules. You can click-and-drag the slider to set the
detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
6. Click Apply to activate the settings.
Figure 9. 1 Face Detection
to enter the face detection settings interface. Configure the trigger channel, arming schedule and
for detailed instructions.
Figure 9. 2 Set Face Detection Sensitivity
128
错误！未找到引用源。