Calling Patrols - OVS LTN8608-P8 Quick Start Manual

User Manual
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed
of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which
the PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to
the next.
5. Click the Add button to add the next key point to the patrol, or you can click the OK button to save the key
point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol, or click the Clear All
button to delete all the key pints for all patrols.

4.2.4 Calling Patrols

Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Steps:
1. Click the button PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
select the PTZ option in the right-click menu to show the PTZ control panel.
2. Click the
3. Select a patrol in the dropdown list and click the Call Patrol button to call it.
User Manual of Network Video Recorder
Figure 4. 6 Key point Configuration
button to show the general settings of the PTZ control.
Figure 4. 7 PTZ Panel - General
in the quick setting bar, or
56