Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
12.7 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
2. Select the Exception Type to HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 12. 29.
Note:
The alarm type can be selected to: Audio Warning, Notify Surveillance Center, Send Email and
Trigger Alarm Output. Please refer to Chapter Setting Alarm Response Actions.
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be triggered from the
5. Click the Apply button to save the settings
Menu > Configuration > Exceptions
Figure 12. 29 Configure HDD Error Alarm
list below.
177
Advertisement
Table of Contents
