Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
Example:
As for 8CH NVR, when you want to connect 2 online cameras and connect 6 network cameras via built-in switch
interfaces, you must disable 2 built-in switch interfaces in the Edit IP camera panel.
To add Cameras for NVR via built-in switch interfaces:
Before you start:
Connect the network cameras via the built-in switch interfaces.
Steps:
1.
Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Note:
2.
Click the Edit button.
Note:
parameters of the camera can't be edited. The IP address of the camera can only be edited in the Network
Configuration interface, see Chapter 9.1 Configuring General Settings for detailed information.
Figure 2. 29 List of Connected Cameras
The cameras connecting to the built-in switch interface cannot be deleted in this menu.
Figure 2. 30 Edit IP Camera Interface
Plug-and-Play means that the camera is connected to the switch interface, so in this case, the
36
Advertisement
Table of Contents
