User Manual
User Manual of 87XX-P Series NVR
Steps:
Click the
Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage. The
parameters in DVR should be the same as POS device.
Click Apply to save the settings.
Note:
the default usage setting is "Console". When you use RS232-Setting you should changed it as "Transparent
channel" and restart your device.
5.
Note:
Note:
click "Hex" enable "Hex" character conversion
Note:
"Start Line Identifier" if the time value is null, that means POS recording is starting all the time, no
beginning command. "End Line Identifier" if the item value is null, that means POS recording is running all
the time, no ending command.
Note:
"Timeout": POS network timeout. The POS device is in the connected state over the time period
icon of RS232-setting port to set receive port of POS.
Figure 15.
POS Protocol setting
choose connection type as "RS2323", protocol items Generic and AVE are available
Choose connection type as "TCP Receive ", protocol item only Generic is available
General POS Setting
Click the
icon of POS Protocol to set POS settings.
Figure 15.7
6 RS232-Receive port Settings Interface
General POS Settings Interface
198