Table of Contents
Advertisement
Quick Operation Guide of 8700-P Series NVR
Start Live View
Steps:
1.
In the live view window, select a playing window by clicking the mouse.
2.
Double-click a camera from the device list to start the live view.
3.
You can click the
button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
Icon
/
Recording
Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1.
Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings interface.
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of Enable Record Schedule to enable recording schedule.
4.
Click Edit to edit record schedule.
5.
Choose the day in a week to configure scheduled recording.
1)
Configure All Day or Customize record:
If you want to configure the all-day recording, please check the All Day checkbox.
If you want to record in different time sections, check the Customize checkbox. Set the Start Time and
End Time.
The time of each segment can't be overlapped. Up to 8 segments can be configured.
Note:
2)
Select a Record Type. The record type can be Normal, Motion, Alarm, Motion & Alarm, and Motion |
Alarm.
3)
Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. You
can also check any of the checkboxes before the date and click Copy.
4)
Click OK to save the settings and exit the Edit Schedule interface.
6.
Click Advanced to configure advanced record parameters.
7.
Optionally, check the checkboxes of other cameras to copy the settings to.
8.
Click Save to validate the above settings.
Description
Icon
Select the
window-division
/
mode
Capture pictures in
/
the live view mode
Previous page
Open/Close audio
/
Adjust volume
/
Full-screen
20
Description
Start/Stop all live view
Start/Stop all
recording
Next page
Start/Stop two-way
audio
Enable/Disable digital
zoom
Advertisement
Table of Contents
