Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
Connect the network cameras via the PoE interfaces.
Steps:
1.
Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Note:
Click the Edit button.
Note:
parameters of the camera can't be edited. The IP address of the camera can only be edited in the Network
Configuration interface, see Chapter 9.1 Configuring General Settings for detailed information.
2.5.5 Editing IP cameras connected to the built-in switch
network interfaces
For A SeriesN-Pseries NVR, the extra network interfaces provide a built-in switch with plug-and-play function.
Figure 2. 27 List of Connected Cameras
The cameras connecting to the PoE interface cannot be deleted in this menu.
Figure 2. 28 Edit IP Camera Interface
Plug-and-Play means that the camera is connected to the PoE interface, so in this case, the
35
Advertisement
Table of Contents
