Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
1. Enter Alarm Output interface.
Select an alarm output and set alarm name and dwell time. Click Schedule button to set the arming
schedule of alarm output.
Note:
Menu> Manual> Alarm.
2. Set up arming schedule of the alarm output.
3. Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to
4. You can also copy the above settings to another channel.
Menu> Configuration> Alarm> Alarm Output
If "Manually Clear" is selected in the dropdown list of Dwell Time, you can clear it only by going to
Figure 8. 4 Alarm Output Setup Interface
Choose one day of a week and up to 8 time periods can be set within each day.
Note:
Time periods shall not be repeated or overlapped.
Figure 8. 5 Set Arming Schedule of Alarm Output
copy an arming schedule to other days.
Click the OK button to complete the video tampering settings of the alarm output No.
124
Advertisement
Table of Contents
