Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
2.3 Using the Wizard for basic configuration
Purpose:
After admin password is set, the setup wizard pops up automatically. It can walk you through some basic settings
of the NVR.
Steps:
1. If you don't want to use the setup wizard at that moment, click the Exit button. You can also choose to use
the Setup Wizard next time by leaving the "Start wizard when the device starts?" checkbox checked.
2. Click the Next button to enter the Date and Time Settings interface.
3. After the time settings, click Next button which takes you back to the Basic Network Setup Wizard
interface.
Figure 2. 5 Start Wizard Interface
Figure 2. 6 Date and Time Settings
24
Advertisement
Table of Contents
