Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
4.
5.
6.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration
and all operating permission in Camera Configuration.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only
has the local/remote playback in the Camera Configuration.
•
User's MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the NVR.
Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 15. 13.
Figure 15. 13 Added User Listed in User Management Interface
Select the user from the list and then click the
shown in Figure 15. 14.
Figure 15. 14 User Permission Settings Interface
Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera Management: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD
property), upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown Reboot: Shutting down or rebooting the NVR.
button to enter the Permission settings interface, as
202
Advertisement
Table of Contents
