User Manual
User Manual of 87XX-P Series NVR
8.1 Setting Motion Detection Alarm
Steps:
1. Enter Motion Detection interface and choose a camera you want to set motion detection.
2. Set up detection area and sensitivity.
3. Click Trigger Channel tab and select one or more channels which will start to record or become full-screen
Menu> Camera> Motion
Figure 8. 1 Motion Detection Setup Interface
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the sensitivity bar to
set sensitivity.
Click Handling button and set alarm response actions.
Figure 8. 2 Set Detection Area and Sensitivity
monitoring when motion alarm is triggered.
Figure 8. 3 Set Trigger Camera of Motion Detection
113