Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
Protect file by setting HDD property to Read-only
Steps:
1.
2.
Note:
HDD Group.
3.
4.
Notes:
1.
You can't save any files in a Read-only HDD. If you want to save files in the HDD, change the property to
R/W.
2.
If there is only one HDD and is set to Read-only, the NVR can't record any files. Only live view mode is
available.
3.
If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in next R/W
HDD. If there is only one HDD, the recording will be stopped.
Figure 5. 40 Unlocking Attention
Enter HDD setting interface.
Menu> HDD
Click
to edit the HDD you want to protect.
Figure 5. 42 HDD General- Editing
To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing
Set the HDD property to Read-only.
Click OK to save settings and back to the upper level menu.
Figure 5. 41 HDD General
75
Advertisement
Table of Contents
