Configuring Pos - OVS 4CH-P4 Quick Operation Manual

User Manual
User Manual of 87XX-P Series NVR

15.4 Configuring POS

Steps:
1.
2.
3.
4.
Click the
Data- directed transmission can be successfully between POS server and DVR/NVR
Purpose: The RS-232 port can be used in two ways:
• Parameters Configuration: Connect a PC to the device through the PC serial port. Device parameters can
be configured by using software such as HyperTerminal. The serial port parameters must be the same as
the device‟s when connecting with the PC serial port.
• Transparent Channel: Connect a serial device directly to the device. The serial device will be controlled
remotely by the PC through the network.
Enter the POS Settings interface.
Menu > Configuration > POS
Select the POS Setting tab to enter the POS Settings interface.
Check the POS checkbox to enable this feature. Enter POS Name and Select connection type.
"TCP Receive" or"RS232" optional
Connection can be used in two ways
 TCP Receive Setting
icon of TCP Receive port to set receive port of POS. Through the port settings,
Figure 15.5
 RS232 Setting
Figure 15.4
POS Settings Interface
TCP Receive port Settings Interface
197