Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
4. Set up arming schedule of the channel.
5. Click Linkage Action tab to set up alarm response actions of motion alarm (please refer to Chapter Setting
6. Click the OK button to complete the motion detection settings of the channel.
Select Arming Schedule tab to set the channel's arming schedule for the motion detection.
Choose one day of a week and up to eight time periods can be set within each day.
Note:
Time periods shall not be repeated or overlapped.
Figure 8. 4 Set Arming Schedule of Motion Detection
Alarm Response Actions).
Figure 8. 5 Set Alarm Response Actions of Motion Detection
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button
to copy an arming schedule to other days.
114
Advertisement
Table of Contents
