Table of Contents
Advertisement
User Manual
User Manual of 87XX-P Series NVR
13.2 Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The
privacy mask can prevent certain surveillance areas to be viewed or recorded.
Steps:
1. Enter the Privacy Mask Settings interface.
2. Select the camera to set privacy mask.
3. Click the checkbox of Enable Privacy Mask to enable this feature.
4. Use the mouse to draw a zone on the window. The zones will be marked with different frame colors.
Note:
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
5. The configured privacy mask zones on the window can be cleared by clicking the corresponding Clear
6. Click the Apply button to save the settings.
Menu > Camera >Privacy Mask
Figure 13. 10 Privacy Mask Settings Interface
Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Figure 13. 11 Set Privacy Mask Area
180
Advertisement
Table of Contents
