Configuring Quota Mode - OVS LTN8608-P8 Quick Start Manual

User Manual
3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
At least 2 hard disks must be installed on your NVR when you want to set a HDD to Redundancy, and there is one
HDD with R/W property.

12.5 Configuring Quota Mode

Purpose:
Each camera can be configured with allocated quota for the storage of recorded files or captured pictures.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Quota, as shown in Figure 12. 18.
The NVR must be rebooted to enable the changes to take effect.
3. Select a camera for which you want to configure quota.
4. Enter the storage capacity in the text fields of Max. Record Capacity (GB) and Max. Picture Capacity (GB),
as shown in Figure 12. 19.
User Manual of Network Video Recorder
Figure 12. 17 Set HDD Property
Figure 12. 18 Storage Mode Settings Interface
158