Configuring Ntp Server - OVS LTN8608-P8 Quick Start Manual

User Manual
5. Click the Apply button to save the settings.
After setting all the required parameters for the DDNS, you can view the connecting status of the device by
checking the Status information.

11.2.4 Configuring NTP Server

Purpose:
A Network Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date/time.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the NTP tab to enter the NTP Settings interface, as shown in Figure 11. 15.
3. Check the Enable NTP checkbox to enable this feature.
4. Configure the following NTP settings:
•
User Manual of Network Video Recorder
enter http:// www.hiddns.com/alias:HTTP port in the address bar to access the device. You can
refer to Chapter 9.2.11 for the mapped HTTP port No.

OPTION 2: Access the devices via NVMS7000
For NVMS7000, in the Add Device window, select
information.
Nickname: Edit a name for the device as you want.
Server Address: www.hiddns.com
Device Domain Name: It refers to the Device Domain Name on the device or the Device Name
on the HiDDNS server you created.
User Name: Enter the user name of the device.
Password: Enter the password of the device.
Figure 11. 14 Access Device via NVMS7000
Figure 11. 15 NTP Settings Interface
Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute.
and then edit the device
136