Setting Motion Detection Alarm - OVS LTN8608-P8 Quick Start Manual

User Manual

8.1 Setting Motion Detection Alarm

Steps:
1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion
detection.
Menu> Camera> Motion
2. Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the sensitivity bar to set
sensitivity.
Click
3. Click Trigger Channel tab and select one or more channels which will start to record/capture or become
full-screen monitoring when motion alarm is triggered, and click Apply to save the settings.
4. Set up arming schedule of the channel.
1) Select Arming Schedule tab to set the arming schedule of handling actions for the motion detection.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply to save the settings
User Manual of Network Video Recorder
Figure 8. 1 Motion Detection Setup Interface
button and set alarm response actions.
Figure 8. 2 Set Trigger Camera of Motion Detection
Time periods shall not be repeated or overlapped.
110