Fuse; Connector - Kubota B2410 Workshop Manual

G GENERAL
(3) Fuse
82410· 82710· 82910 WSM, 12271
• Use fuses with specified capacity.
Neither too large or small capacity fuse is acceptable.
• Never use steel or copper wire in place of fuse.
• Do not install working light, radio set, etc. on machine which is
not provided with reserve power supply.
• Do not install accessories if fuse capacity of reserve power
supply is exceeded.
11790F00150
(4) Connector
(1) Fuse
(2)
Fusible Link
11790GOO140
11790F00160
(A)
(8)
• For connector with lock, push lock to separate.
(A) Push
11790GOO150
• In separating connectors, do not pull wire harnesses.
• Hold connector bodies to separate.
• Use sandpaper to remove rust from terminals.
• Repair deformed terminal. Make certain there is no terminal
being exposed or displaced.
11790F00170
11790F00180
(A) Correct
(1) Exposed Terminal
(2)
8end Terminal
G-6
(B) Incorrect
(3)
Sandpaper
(4) Rust
11790GOO160
11790G00170