Separating Brake Pedal; Clearance Between Brake Pedal Shaft And Center Frame Bush - Kubota B2410 Workshop Manual

B2410 • B2710 • B2910 WSM, 12271
5 BRAKES
Separating Brake Pedal
®I
~
12490F50040
(11) Clevis Pin
(12) Brake Rod
(13) Parking Brake Lever
(8) Clutch Pedal
(9) Brake Pedal Shaft
(10) Spring Lock Pin
Factory spec.
o
to 0.165 mm
Clearance between o
to 0.00649 in.
brake pedal shaft and
1.0mm
center frame bush
Allowable limit
0.039 in.
Brake pedal shaft O.D. Factory spec.
24.916 to 25.030 mm
0.98094 to 0.98543 in.
Center frame bush I.D. Factory spec.
25.030 to 25.081 mm
0.98543 to 0.98744 in.
6. Pull the right and left brake pedals from the brake
pedal shaft (9).
7. Tap out the brake pedal shaft (9) to the left, and
remove it with the clutch pedal (8).
(When reassembling)
• Apply grease to the brake pedal shaft.
• When inserting the spring pin, face its split in the
direction at right angle to the brake pedal shaft.
12490850050
Clearance between Brake Pedal Shaft and Center Frame Bush
1. Measure the brake pedal shaft 0.0. with an outside micrometer.
2. Measure the bush (3) 1.0. with a cylinder gauge.
3. If the clearance exceeds the allowable limit, replace it.
(5) Brake Pedal LH
(6) Spring Pin
(7) Return Spring
12010F50050
(A) (8)
(1) External Snap Ring
(2) Collar
(3) Return Spring
(4) Brake Pedal RH
1. Remove the spring lock pin (10) of brake rod (12)
and pull out the brake rod (12).
2. Remove the return spring (3), (7).
3. Remove the external snap ring (1) at the end of the
brake pedal shaft (9).
4. Remove the spring pin (6) of the brake pedal LH (5).
5. Remove the clevis pin (11) of the clutch pedal (8).
(1) Brake Pedal Shaft
(2) Center Frame
(3) Bush
(A) Bush 1.0.
(B) Brake Pedal Shaft 0.0.
12010850050
5-S3